Flintlock triple-barrelled pistol, by Michele Lorenzoni, probably for Cosimo III de Medici, Italy (Florence), ca. 1680

The stock is burr walnut, with iron mounts finely chiselled with scrollwork. On the butt a faun;'s mask chiselled in high relief. Inlaid in the stock, behind the barrel tang, an heraldic escutcheon chiselled with the Medici arms surmounted by the Medici crown.
The lockplate is engraved with a figure of a huntsman discharging a fowling piece, and with foliate scrollwork.
The breech ends of the three barrels are enclosed by a sleeve, through which the touch hole passes. The barrels are revolved by hand, the lock had also to be cocked and primed between each shot. The trigger guard operates as a locking device, when pressed upwards, it disengages from a slot cut in the sleeve to permit the barrels to revolve. The lock is signed 'Lorenzoni'.

Bequeathed by Major Victor Alexander Farquharson

This pistol was made for Cosimo III de Medici, Grand Duke of Tuscany (1670-1723), or a member of his family.

Arms and armour are often dissociated with art. However, they were influenced by the same design sources as other art forms including architecture, sculpture, goldsmiths' work, stained glass and ceramics. These sources had to be adapted to awkwardly shaped devices required to perform complicated technical functions. Armour and weapons were collected as works of art as much as military tools and were presented as gifts to honour ambassadors and other dignitaries.

Firearms combined virtuoso craftsmanship with high quality engineering. This gun is fitted with a flintlock firing mechanism. Flintlock guns largely superseded wheel-lock guns by the late 17th century. The flintlock's invention is credited to Marin Le Bourgeois, gunmaker to Louis XIII of France, in around 1610.

The flintlock was less complicated and more reliable than a wheel-lock. Its simplicity encouraged the development o fsmaller, lighter guns. Flintlocks could fire accurately for up to 100 metres. Their increasing accuracy encouraged wars to be fought at longer range.

Some flintlocks had spirally grooved or rifled barrels improving their accuracy and range. Flintlock guns with rifled barrels needed more cleaning and took longer to load. They were more commonly used in hunting than on the battlefield where guns were fired quickly in volleys.

Flintlocks in Operation

The flintlock was fired when the flint held in the cock, struck the steel pan (frizzen) opposite, causing sparks to ignite the priming powder. A detailed description of loading and firing a flintlock gun follows:

Most flintlock guns were loaded from the muzzle with gunpowder and lead shot. These are pushed into the breech of the barrel with the ramrod. The ramrod is stored in a slot beneath the barrel.

An arm, or cock, at the back of the lock holds a sharp piece of flint. This is moved part of the way backwards until it clicks into position at half-cock. It has a safety catch to prevent the gun being fired accidentally.

On top of the lock is a flash pan which is charged with priming powder, a fine powder that ignites easily. The flash pan is opened by lifting the cover, called a frizzen. When the flash pan is filled with a measured dose of priming powder, the frizzen is then closed presenting a pan-shaped steel surface towards the cocked flint.

The cock is pulled back further, from half-cock to full-cock, releasing its safetly catch. When the trigger is pulled, the cock holding the flint springs forwards. The flint strikes the frizzen, opening it to reveal the priming powder, and causing sparks to fly when it strikes the hard steel surface. The sparks ignite the priming powder in the flash pan. The flash passes through a vent or touchhole into the breech of the barrel and ignites the main powder charge, and the gun fires.

M.677-1927