Fractal Table II
Fractal Table
2007-2009 (designed), 2011 (manufactured)
2007-2009 (designed), 2011 (manufactured)
Artist/Maker | |
Place of origin |
This table was made using an additive digital manufacturing technique known as stereolithography. The table's complex, interlocking structure is based on the form of the dragon tree (Dracaena). The design was created first as a computer model - using mathematical formulas to replicate this tree's repeating, 'fractal' branch structure. The table was manufactured over a period of 7 to 10 days. Very thin layers of liquid epoxy resin were spread onto a metal plate, in a sealed tank. UV lasers were then used to 'draw' the table's design onto these layers of resin. The lasers would solidify those areas that they struck, each solid section becoming a small horizontal 'slice' of the table. The lasers bonded each new layer to the last, slowly building the form of the table from bottom to top.
Delve deeper
Discover more about this object
Object details
Categories | |
Object type | |
Title | Fractal Table II (assigned by artist) |
Materials and techniques | epoxy resin and polyurethane |
Brief description | Epoxy resin table, the hollow structure filled with polyurethane. Number 7 of an edition of 25. |
Physical description | The design of this table is based on the form of the dragon tree (Dracaena). To develop the computer models for the table, the designers used mathematical algorithms to create a design which reproduced the fractal growth patterns found in tree's branching structure. A fractal is a geometric shape that can be split into parts, each part being a smaller copy of the whole. In manufacturing this table, it was the use of an additive digital technique that allowed the designers to reproduce these complex, repeating forms in 3D. The table's complicated interlocking structure could not be easily built using other techniques. The table was manufactured using an additive digital 'printing' process known as stereolithography. Thin layers (of about 0.1 mm) of liquid epoxy resin were spread on to a metal plate, in a sealed tank. After each layer had been spread, UV lasers were used to trace the form of the table in the liquid resin. Each area touched by the laser would harden to create one horizontal layer of the table. Those areas of resin not touched by the laser remained liquid, and fell away once the table was complete. As each layer was spread and lasered, it bonded to those beneath it. Through this process, the form of the table gradually grew. It took 7 to 10 days for the hundreds of horizontal layers to be added. Once complete, the table was cleaned and put into a UV oven for 'post-curing' - to further harden the resin. The clear epoxy resin was then dyed by putting the table into a pigment bath for a day. A video showing this process can be seen on the V&A's website, see references. |
Dimensions |
|
Gallery label |
|
Credit line | Purchased by the Outset Design Fund |
Historical context | While 3D printing techniques have been developed since the late 1970s and 1980s, the huge expense and complication of early technologies mean that it is only recently that designers have begun to experiment more widely with them. This table highlights the potential which additive digital manufacturing technqiues offer for complex design. The table's branching structure could only be created due to the additive process through which it was formed. |
Summary | This table was made using an additive digital manufacturing technique known as stereolithography. The table's complex, interlocking structure is based on the form of the dragon tree (Dracaena). The design was created first as a computer model - using mathematical formulas to replicate this tree's repeating, 'fractal' branch structure. The table was manufactured over a period of 7 to 10 days. Very thin layers of liquid epoxy resin were spread onto a metal plate, in a sealed tank. UV lasers were then used to 'draw' the table's design onto these layers of resin. The lasers would solidify those areas that they struck, each solid section becoming a small horizontal 'slice' of the table. The lasers bonded each new layer to the last, slowly building the form of the table from bottom to top. |
Bibliographic reference | A video showing this process can be seen on the V&A's website:
http://web.archive.org/web/20230214154223/http://www.vam.ac.uk/content/%20videos/h/video-how-was-it-made-the-fractal-%20table/ |
Collection | |
Accession number | W.29-2011 |
About this object record
Explore the Collections contains over a million catalogue records, and over half a million images. It is a working database that includes information compiled over the life of the museum. Some of our records may contain offensive and discriminatory language, or reflect outdated ideas, practice and analysis. We are committed to addressing these issues, and to review and update our records accordingly.
You can write to us to suggest improvements to the record.
Suggest feedback
You can write to us to suggest improvements to the record.
Suggest feedback
Record created | February 3, 2012 |
Record URL |
Download as: JSON