Image of Gallery in South Kensington
On display at V&A South Kensington
Cast Courts, The Ruddock Family Cast Court, Room 46A

The Maries at the Sepulchre

Relief
1926 (made), ca. 1100 (made)
Place of origin

The original limestone sculptures formed parts of the piers, or pillars, from the Benedictine monastery of Santo Domingo de Silos, a Romanesque building admired for its architecture and sculpture.

Here we see Christ’s descent from the Cross, and The Three Marys at Christ’s tomb. The casts are not painted and so they more or less reflect the appearance of the sculptures as they looked in the early 20th century, when the original bright colours of the carvings had been lost.


Object details

Categories
Object type
TitleThe Maries at the Sepulchre (generic title)
Materials and techniques
Plaster cast
Brief description
Plaster cast of a relief made in 1926 and depicting the Maries at the Sepulchre. The original was made in Madrid about 1100.
Physical description
Plaster cast of a relief depicting the Maries at the Sepulchre, on a pillar in the cloister of the Monastery of Santo Domingo de Silos.
Dimensions
  • Width: 97cm
Production typeCopy
Gallery label
  • 1. Casts of Unknown artist Reliefs featuring scenes from the New Testament About 1100 The original limestone sculptures formed parts of the piers, or pillars, from the Benedictine monastery of Santo Domingo de Silos, a Romanesque building admired for its architecture and sculpture. Here we see Christ’s descent from the Cross, and The Three Marys at Christ’s tomb. The casts are not painted and so they more or less reflect the appearance of the sculptures as they looked in the early 20th century, when the original bright colours of the carvings had been lost. Casts 1926 Plaster Madrid, Spain Acquired by exchange from the Museo de Reproducciones, Madrid in 1926 Museum nos. Repro.A.1926-15 & 16 Originals Carved stone Madrid Monastery of Santo Domingo de Silos, Spain(04/07/2018)
  • This relief from the Benedictine Monastery of Santo Domingo de Silos depicts a scene from Christ’s Passion in the New Testament: the three Maries at the Sepulchre. The original stone sculpture formed part of one of the piers in the upper storey of the monastery. The limestone originals were once painted in bright colours, but these no longer survive. The casts accurately reflect the appearance of the sculptures as they looked in the early 20th century, their colour imitating that of the bare limestone. Holly Trusted
Object history
Plaster cast of a relief by an unknown caster in Madrid, 1926. The relief depicts the Maries at the Sepulchre and was acquired in exchange from the Museo de Reproducciones Artisticas, Madrid in 1926. The original was made in stone and formed parts of the piers, or pillars, from the Benedictine monastery of Santo Domingo de Silos in Madrid. It was made by an unknown artist about 1100.
Historical context
Making plaster copies is a centuries-old tradition that reached the height of its popularity during the 19th century. The V&A's casts are of large-scale architectural and sculptural works as well as small scale, jewelled book covers and ivory plaques, these last known as fictile ivories.

The Museum commissioned casts directly from makers and acquired others in exchange. Oronzio Lelli, of Florence was a key overseas supplier while, in London, Giovanni Franchi and Domenico Brucciani upheld a strong Italian tradition as highly-skilled mould-makers, or formatori.

Some casts are highly accurate depictions of original works, whilst others are more selective, replicating the outer surface of the original work, rather than its whole structure. Like a photograph, they record the moment the cast was taken: alterations, repairs and the wear and tear of age are all reproduced in the copies. The plasters can also be re-worked, so that their appearance differs slightly from the original from which they were taken.

To make a plaster cast, a negative mould has to be taken of the original object. The initial mould could be made from one of several ways. A flexible mould could be made by mixing wax with gutta-percha, a rubbery latex product taken from tropical trees. These two substances formed a mould that had a slightly elastic quality, so that it could easily be removed from the original object. Moulds were also made from gelatine, plaster or clay, and could then be used to create a plaster mould to use for casting.
When mixed with water, plaster can be poured into a prepared mould, allowed to set, and can be removed to produce a finished solid form. The moulds are coated with a separating or paring agent to prevent the newly poured plaster sticking to them. The smooth liquid state and slight expansion while setting allowed the quick drying plaster to infill even the most intricate contours of a mould.
Flatter, smaller objects in low relief usually require only one mould to cast the object. For more complex objects, with a raised surface, the mould would have to be made from a number of sections, known as piece-moulds. These pieces are held together in the so-called mother-mould, in order to create a mould of the whole object. Once the object has been cast from this mother-mould, the piece-moulds can be easily removed one by one, to create a cast of the three-dimensional object.
Subjects depicted
Summary
The original limestone sculptures formed parts of the piers, or pillars, from the Benedictine monastery of Santo Domingo de Silos, a Romanesque building admired for its architecture and sculpture.

Here we see Christ’s descent from the Cross, and The Three Marys at Christ’s tomb. The casts are not painted and so they more or less reflect the appearance of the sculptures as they looked in the early 20th century, when the original bright colours of the carvings had been lost.
Collection
Accession number
REPRO.A.1926-15

About this object record

Explore the Collections contains over a million catalogue records, and over half a million images. It is a working database that includes information compiled over the life of the museum. Some of our records may contain offensive and discriminatory language, or reflect outdated ideas, practice and analysis. We are committed to addressing these issues, and to review and update our records accordingly.

You can write to us to suggest improvements to the record.

Suggest feedback

Record createdJune 27, 2000
Record URL
Download as: JSONIIIF Manifest