Vessel
1988 (made)
| Artist/Maker | |
| Place of origin |
For Takiguchi Kazuo, the young Kyoto-based maker of the large stoneware vessel, the development of a personal sculptural idiom has been closely associated with the pioneering of a particular method of hand-building.
The technique involves preparing a large sheet of extremely thin clay that is then folded and joined in a dynamic sequence of movements into a structure immediately resembling that of the intended final form. In the mid-1980s, when Takiguchi first used the technique, he lifted the clay up from the floor. Because this limited him to rather box-like shapes he went on to develop a way of draping the clay over moulds made from loosely assembled components and making his forms upside down. The new method allowed him to achieve the greater sense of fullness that he sought. At the same time the possibility of rearranging the components of the moulds allowed him to experiment with a much wider range of shapes than before. Having made a basic form, Takiguchi uses a number of secondary techniques to give it definition and character. These include pushing the walls out from the inside, compressing them from the outside, and cutting and joining, sometimes with the addition or removal of segments of clay.
Takiguchi's exploration of formal issues of shape, colour and texture through the making of individual works has been accompanied by his growing interest in the relationship between his sculptures and the surroundings in which they are displayed. When he is preparing for an exhibition he begins by making an exhaustive study of the venue using sketches, photographs and videos. It is only then that he starts to make any work. He develops his forms with the aim of creating an environment in which sculptures and surroundings are integrated into a single whole. The nature of a given series of work is determined by the process of planning for a particular exhibition and the total installation, usually incorporating an arrangement of props especially prepared for the occasion, is presented as an artistic statement in its own right.
The technique involves preparing a large sheet of extremely thin clay that is then folded and joined in a dynamic sequence of movements into a structure immediately resembling that of the intended final form. In the mid-1980s, when Takiguchi first used the technique, he lifted the clay up from the floor. Because this limited him to rather box-like shapes he went on to develop a way of draping the clay over moulds made from loosely assembled components and making his forms upside down. The new method allowed him to achieve the greater sense of fullness that he sought. At the same time the possibility of rearranging the components of the moulds allowed him to experiment with a much wider range of shapes than before. Having made a basic form, Takiguchi uses a number of secondary techniques to give it definition and character. These include pushing the walls out from the inside, compressing them from the outside, and cutting and joining, sometimes with the addition or removal of segments of clay.
Takiguchi's exploration of formal issues of shape, colour and texture through the making of individual works has been accompanied by his growing interest in the relationship between his sculptures and the surroundings in which they are displayed. When he is preparing for an exhibition he begins by making an exhaustive study of the venue using sketches, photographs and videos. It is only then that he starts to make any work. He develops his forms with the aim of creating an environment in which sculptures and surroundings are integrated into a single whole. The nature of a given series of work is determined by the process of planning for a particular exhibition and the total installation, usually incorporating an arrangement of props especially prepared for the occasion, is presented as an artistic statement in its own right.
Object details
| Categories | |
| Object type | |
| Materials and techniques | Stoneware with powdery green glaze |
| Brief description | Vessel, stoneware with powdery green glaze, made by Takiguchi Kazuo, Japan (Kyoto), 1988 |
| Physical description | Vessel, large shoe-shaped form with a fully rounded rear section, a triangular mouth with un uneven edge rising at the front, and an angular forward section with a sharp vertical joint. Made from a large thin sheet of clay; textile imprint still visible on surface; some seams still visible. Glaze coverage complete on exterior and interior. Scars from firing supports on underside. [Wooden box, signed on outside by the artist: 'Mudai / 1988 nen aki / Kazuo' + seal.] |
| Dimensions |
|
| Style | |
| Gallery label | Vessel
Glazed stoneware
Takiguchi Kazuo (1953-)
1988 |
| Object history | Purchased from the maker. |
| Summary | For Takiguchi Kazuo, the young Kyoto-based maker of the large stoneware vessel, the development of a personal sculptural idiom has been closely associated with the pioneering of a particular method of hand-building. The technique involves preparing a large sheet of extremely thin clay that is then folded and joined in a dynamic sequence of movements into a structure immediately resembling that of the intended final form. In the mid-1980s, when Takiguchi first used the technique, he lifted the clay up from the floor. Because this limited him to rather box-like shapes he went on to develop a way of draping the clay over moulds made from loosely assembled components and making his forms upside down. The new method allowed him to achieve the greater sense of fullness that he sought. At the same time the possibility of rearranging the components of the moulds allowed him to experiment with a much wider range of shapes than before. Having made a basic form, Takiguchi uses a number of secondary techniques to give it definition and character. These include pushing the walls out from the inside, compressing them from the outside, and cutting and joining, sometimes with the addition or removal of segments of clay. Takiguchi's exploration of formal issues of shape, colour and texture through the making of individual works has been accompanied by his growing interest in the relationship between his sculptures and the surroundings in which they are displayed. When he is preparing for an exhibition he begins by making an exhaustive study of the venue using sketches, photographs and videos. It is only then that he starts to make any work. He develops his forms with the aim of creating an environment in which sculptures and surroundings are integrated into a single whole. The nature of a given series of work is determined by the process of planning for a particular exhibition and the total installation, usually incorporating an arrangement of props especially prepared for the occasion, is presented as an artistic statement in its own right. |
| Collection | |
| Accession number | FE.15-1989 |
About this object record
Explore the Collections contains over a million catalogue records, and over half a million images. It is a working database that includes information compiled over the life of the museum. Some of our records may contain offensive and discriminatory language, or reflect outdated ideas, practice and analysis. We are committed to addressing these issues, and to review and update our records accordingly.
You can write to us to suggest improvements to the record.
Suggest feedback
You can write to us to suggest improvements to the record.
Suggest feedback
| Record created | February 12, 2000 |
| Record URL |
Download as: JSON
