Effigy of Sir Ralph Fitzherbert thumbnail 1
Effigy of Sir Ralph Fitzherbert thumbnail 2
+8
images
Image of Gallery in South Kensington
On display at V&A South Kensington
Cast Courts, The Ruddock Family Cast Court, Room 46A

Effigy of Sir Ralph Fitzherbert

Effigy
after 1850 (made), ca. 1485-1500 (made)
Place Of Origin

These plaster casts record the finely carved details of both figures, although they do not convey the surface of the polished alabaster seen in the original effigies. This stone was prized for its luminosity and frequently used for tombs and funerary effigies in England during the 14th and 15th centuries.


object details
Categories
Object Type
Materials and Techniques
Plaster cast
Brief Description
Plaster cast of an effigy of Sir Ralph Fitzherbert probably made in London after 1850. The original was made in Derbyshire about 1485-1500.
Physical Description
Plaster cast of the Effigy of Sir Ralph Fitzherbert.
Dimensions
  • Length: 208.5cm
  • Width: 53.5cm
Production typeCopy
Gallery Label
  • Casts of Unknown artist Effigies of Sir Ralph Fitzherbert and Elizabeth, Lady Fitzherbert About 1485–1500 These plaster casts record the finely carved details of both figures, although they do not convey the surface of the polished alabaster seen in the original effigies. This stone was prized for its luminosity and frequently used for tombs and funerary effigies in England during the 14th and 15th centuries. Casts After 1850 Plaster Probably London Given by the Architectural Association in 1916 Museum nos. Repro.A.1916-214, 215 Originals Alabaster Derbyshire St Mary and St Barlock’s Church, Norbury(21/06/2018)
  • There are two sorts of alabaster. Calcite alabaster is very hard and was used in ancient times. This object is made of gypsum alabaster which is a fine-grained, soft and smooth stone. Although at first glance it looks a little like marble, which it was intended to imitate, it was much easier to carve due to its softness, and alabaster objects were therefore significantly cheaper to produce. Marble does not originate in England, so it was imported if needed, whereas in the 15th century there were important alabaster quarries in Nottingham, York, Burton-on-Trent and London. England was a major centre for the production of objects such as this one. During period, they were exported in very large numbers to Europe where they survive, unlike many examples which remained in England and were destroyed or greatly damaged during the Reformation. Plaster cast of the Effigy of Sir Ralph Fitzherbert (d. 1483), late 15th century, from Norbury Church, Norbury, Derbyshire. Shargroves
Credit line
Given by the Architectural Association
Object history
Copy of an effigy of Sir Ralph Fitzherbert made form plaster, probably made in London after 1850 and given by the Architectural Association in 1916. The original was made from alabaster in Derbyshire about 1485-1500 and is from St Mary and St Barlock's Church, Norbury. It is one of two effigies with the other being that of Lady Elizabeth Fitzherbert.

Historical context
Making plaster copies is a centuries-old tradition that reached the height of its popularity during the 19th century. The V&A's casts are of large-scale architectural and sculptural works as well as small scale, jewelled book covers and ivory plaques, these last known as fictile ivories.



The Museum commissioned casts directly from makers and acquired others in exchange. Oronzio Lelli, of Florence was a key overseas supplier while, in London, Giovanni Franchi and Domenico Brucciani upheld a strong Italian tradition as highly-skilled mould-makers, or formatori.



Some casts are highly accurate depictions of original works, whilst others are more selective, replicating the outer surface of the original work, rather than its whole structure. Like a photograph, they record the moment the cast was taken: alterations, repairs and the wear and tear of age are all reproduced in the copies. The plasters can also be re-worked, so that their appearance differs slightly from the original from which they were taken.



To make a plaster cast, a negative mould has to be taken of the original object. The initial mould could be made from one of several ways. A flexible mould could be made by mixing wax with gutta-percha, a rubbery latex product taken from tropical trees. These two substances formed a mould that had a slightly elastic quality, so that it could easily be removed from the original object. Moulds were also made from gelatine, plaster or clay, and could then be used to create a plaster mould to use for casting.

When mixed with water, plaster can be poured into a prepared mould, allowed to set, and can be removed to produce a finished solid form. The moulds are coated with a separating or paring agent to prevent the newly poured plaster sticking to them. The smooth liquid state and slight expansion while setting allowed the quick drying plaster to infill even the most intricate contours of a mould.

Flatter, smaller objects in low relief usually require only one mould to cast the object. For more complex objects, with a raised surface, the mould would have to be made from a number of sections, known as piece-moulds. These pieces are held together in the so-called mother-mould, in order to create a mould of the whole object. Once the object has been cast from this mother-mould, the piece-moulds can be easily removed one by one, to create a cast of the three-dimensional object.

Subjects depicted
Summary
These plaster casts record the finely carved details of both figures, although they do not convey the surface of the polished alabaster seen in the original effigies. This stone was prized for its luminosity and frequently used for tombs and funerary effigies in England during the 14th and 15th centuries.
Collection
Accession Number
REPRO.A.1916-214

About this object record

Explore the Collections contains over a million catalogue records, and over half a million images. It is a working database that includes information compiled over the life of the museum. Some of our records may contain offensive and discriminatory language, or reflect outdated ideas, practice and analysis. We are committed to addressing these issues, and to review and update our records accordingly.

You can write to us to suggest improvements to the record.

Suggest Feedback

record createdOctober 2, 2006
Record URL