Chair thumbnail 1
Chair thumbnail 2
+3
images
Image of Gallery in South Kensington
On display at V&A South Kensington
Furniture, Room 135, The Dr Susan Weber Gallery

Chair

1933 (designed), 1933-1939 (manufactured)
Artist/Maker
Place of origin

Between 1928 and 1932 Aalto was influenced by tubular-steel furniture. In 1928 he ordered many pieces of metal furniture designed by Marcel Breuer for his own house, and the following year he designed his first cantilevered chair, made from tubular-steel legs and a plywood seat. He designed other armchairs and armless chairs in the following few years, all of which were inspired by Breuer's and other European models. In 1931, though he was still working in tubular steel, Aalto began a move away from metal. Perhaps inspired by his thinking about the needs of patients at the Paimio sanatorium - an isolation hospital he designed for tuberculosis patients in the forest east of Turku - he began designing all-wood chairs. In an oft-cited lecture in 1935 Aalto specified the ways in which tubular-steel furniture was not 'rational':

. . . a piece of furniture that forms part of a person's daily habitat should not cause excessive glare from light reflection; ditto, it should not be disadvantageous in terms of sound, sound absorption, etc. A piece that comes into the most intimate contact with man, as a chair does, shouldn't be constructed of materials that are excessively good conductors of heat . . . These criticisms . . . when put together form the mystical concept of 'cozy'.

This chair might be termed a transitional design that marked the end of Aalto's attempts to create cantilevered chairs with tubular-steel bases, and his move to designing two-legged chairs entirely in wood. In its form, it was still a translation rather than the radical rethinking that his contemporary furniture for Paimio was. A child's version of this chair had been designed in 1931-2, but an adult-sized chair required relatively thick legs to support the sitter. As Aalto clearly wished the chair to be springy, the leg design needed considerable development. The legs were made from moulded, laminated Finnish birch and the seat from much thinner birch plywood. The nature of the material was emphasized by the choice, in this example, of birch with a curly figure or grain for the seat and back.


Object details

Category
Object type
Materials and techniques
Moulded laminated birch and moulded birch plywood
Brief description
Cantilevered chair made of moulded laminated birch and moulded birch plywood
Physical description
Cantilevered chair with legs extending up to create a support structure for a seat and back and down along the floor to create a base, each formed from a single piece of moulded birch plywood. The support structure consists of two U-shapes of laminated birch wood (8 layers) set with their open ends to the back. The bottom and middle part create the leg and the top supports the seat. The top end is slightly bent around the back edge where the seat meets the back; the laminate of the support is thinned (to about 5 layers) to allow a tight connection. At the front, the support is not thinned, creating a gap between support and seat element. The seat/back panel (7 layers of veneer) is moulded with a ca. 3 cm outwards curve on either end. The seat slightly overhangs the support structure at either side. The seat/back panel is screwed to the support structure from underneath with 4 recessed flat head metal screws set along either side of the seat and with two smaller rounded head screws at the top end of the support. Under the middle of the front of the seat is a white plastic label attached with two small nails. The text is in white on red background (text as in ‘Marks and Inscriptions’). Two more nails above the label suggest another label of which are no traces.
Dimensions
  • Height: 82.6cm
  • Width: 47.5cm
  • Depth: 57cm
  • Seat height: 41.1cm
Measured on 03/12/10 by JS
Style
Production typeMass produced
Marks and inscriptions
FINMAR Ltd. Design Reg. 787811-19 Patent No. 431563 [?] Made in Finland (label on middle underside of seat close to outer edge)
Gallery label
  • Cantilevered Chair 1932-3 Alvar Aalto (1898-1976) Finland Manufactured by Huonekalu-ja Rakennustyötehdas Oy, Turku Moulded and laminated birch and plywood V&A: W.38-1981(01/01/2006)
  • Chair 1932–3 Alvar Aalto (1898–1976) Finland Manufactured mid 1930s by Huonekalu-ja Rakennustyötehdas Oy, Turku Base: 9-layered laminated birch Seat and back: 8-ply birch plywood Museum no. W.39-1981 The design of this chair exploits the unique tensile strength of thickly laminated wood, and the fact that plywood can be made very thin if it is supported. The base is made of moulded, laminated veneer with the grain running in the same direction. The seat is moulded plywood, the grain of each layer glued at right angles to the next.(01/12/2012)
Summary
Between 1928 and 1932 Aalto was influenced by tubular-steel furniture. In 1928 he ordered many pieces of metal furniture designed by Marcel Breuer for his own house, and the following year he designed his first cantilevered chair, made from tubular-steel legs and a plywood seat. He designed other armchairs and armless chairs in the following few years, all of which were inspired by Breuer's and other European models. In 1931, though he was still working in tubular steel, Aalto began a move away from metal. Perhaps inspired by his thinking about the needs of patients at the Paimio sanatorium - an isolation hospital he designed for tuberculosis patients in the forest east of Turku - he began designing all-wood chairs. In an oft-cited lecture in 1935 Aalto specified the ways in which tubular-steel furniture was not 'rational':

. . . a piece of furniture that forms part of a person's daily habitat should not cause excessive glare from light reflection; ditto, it should not be disadvantageous in terms of sound, sound absorption, etc. A piece that comes into the most intimate contact with man, as a chair does, shouldn't be constructed of materials that are excessively good conductors of heat . . . These criticisms . . . when put together form the mystical concept of 'cozy'.

This chair might be termed a transitional design that marked the end of Aalto's attempts to create cantilevered chairs with tubular-steel bases, and his move to designing two-legged chairs entirely in wood. In its form, it was still a translation rather than the radical rethinking that his contemporary furniture for Paimio was. A child's version of this chair had been designed in 1931-2, but an adult-sized chair required relatively thick legs to support the sitter. As Aalto clearly wished the chair to be springy, the leg design needed considerable development. The legs were made from moulded, laminated Finnish birch and the seat from much thinner birch plywood. The nature of the material was emphasized by the choice, in this example, of birch with a curly figure or grain for the seat and back.
Collection
Accession number
W.39-1981

About this object record

Explore the Collections contains over a million catalogue records, and over half a million images. It is a working database that includes information compiled over the life of the museum. Some of our records may contain offensive and discriminatory language, or reflect outdated ideas, practice and analysis. We are committed to addressing these issues, and to review and update our records accordingly.

You can write to us to suggest improvements to the record.

Suggest feedback

Record createdMarch 22, 2006
Record URL
Download as: JSON